rf_35/09.14/6.2 dieses dokument ist ur heberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg tech n rpc-3. 5 rosenberg e p.o.box 12 www.rosen b a ll dime n interfa c a ccordi n mechan i docum a pplicat i materi a connec center outer c n ical dat 5 0 a irl e r hochfrequ e 60 d-845 2 b erger.de n sions are i n c e n g to i cally compa ents i on note a l and plati tor parts conductor onductor a sheet ine jack e nztechnik g m 2 6 tittmoning n mm; tolera n tible with ng / jack m bh & co. k g germany n ces accordi g y t e i ng to iso 2 7 iec 60169- 2 rpc-2.92 a n a n001 ?cal i material cube brass 03 k t el. : +49 86 8 e mail : info@r o 7 68 m-h 2 3 n d sm a i bration ser v platin gold, gold, k 101-k 1 8 4 18-0 o senberger.d e v ices? g min. 1.27 m min. 1.27 m 1 00 e m , over che m m , over che m p a 1 / m ical nickel m ical nickel a ge / 3
technical data sheet rpc-3.50 airline jack / jack 03K101-K100 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data insertion loss ? 0.70 db at 26.5 ghz mechanical data mating cycles 500 maximum torque 1.70 nm recommended torque 0.90 nm airline dimensions at 23 c: - diameter outer conductor 3.500 mm 0.005 mm - diameter inner conductor 1.520 mm 0.005 mm - length outer conductor 100.00 mm + 0.02 mm - length inner conductor 100.00 mm - 0.02 mm - length difference 0.04 mm (outer conductor ? inner conductor) calculated data (non warranted) lossless characteristic impedance 1 50 ? 0.35 ? return loss 2 40 db, 0.3 ghz to 4 ghz 38 db, 4 ghz to 8 ghz 35 db, 8 ghz to 26.5 ghz 1. the lossless characteristic impedance is calculated from the specified diameters of the inner and outer conductor. 2. the return loss is calculated from the characteri stic impedance, the skin depth and the connector interface. general standard definitions for proper work the vector network analyzer (vna) us ed needs a model describing the electrical behaviour of this calibration standard. depending on the vna type different models, units and terms are used and have to be entered into the vna. all values are based on typical geometry and plating. - offset z o / impedance / z o 50 ? - offset delay 333.706 ps - length (electrical) / offset length 100.042 mm - offset loss 3.00 g ? /s - loss 0.0870 db/ ghz environmental data operating temperature range 3 +20 c to +26 c storage temperature range 0 c to +50 c rohs compliant 3. this range is a recommendation. however, the airline can be used in a wider range. any temperature change from 23 c results in dimensional changes.
technical data sheet rpc-3.50 airline jack / jack 03K101-K100 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 3 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg declaration of calibration options factory calibration standard delivery for this calibration standard includes a factory calibration. the calibration certificate issued reports individual mechanical calibration results, trac eable to national / international standards. model based standard definitions are reported in an agilent/key sight, rohde & schwarz and anritsu compatible vna format. accredited calibration not available. for further, more detailed information see application note an001 on the rosenberger homepage. calibration interval recommendation 12 months packing standard 1 pce in box weight 24.7 g/pce center conductor loose in an acrylic glass tube draft date approved date rev. engineering change number name date herbert babinger 15.10.14 martin moder 15.10.14 d00 14-1492 herbert babinger 15.10.14 while the information has been carefully compiled to the best of our knowledge, nothing is int ended as representation or warran ty on our part and no statement herein shall be construed as recommendati on to infringe existing patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
